The Aqua Pro 24” Surface Cleaner is the Hover Cover version of the Ground Force. The smooth floating action of our Hover Cover design provides you with quick and easy maneuverability. The cover and handle are constructed from airplane grade aluminum and powder coated. The heavy duty nylon brush helps eliminate overspray. The Flip–N–Fold handle design allows the unit to collapse for easy transport and storage.
The signature Whisper Wash machined and balanced spray bar rotates underneath, providing the pressure cleaning force your operation requires. The Signature Whisper Wash Swivel with two self-lubricating twin thrust bearings provide the power to utilize either a two or four tip spray bar & eliminates zebra striping.
When you utilize the cleaning force behind the Aqua Pro, you can be assured that your operation is backed by the industry standard in flat surface cleaning. Built to standards only maintained by Whisper Wash, the Aqua Pro gives your operation the power to pressure clean!
WARNING: Read Before Operating Machine!
ALWAYS WEAR PROTECTIVE EYE WEAR
KEEP CLEAR OF ROTATING NOZZLES
NEVER LOCK TRIGGER GUN OPEN WITH ANY DEVICE
DRAIN WATER IN COLD WEATHER TO AVOID FREEZING
Tampering with any part of this machine will void all warranties
Instructions for Operation
1. Connect to Pressure Washer.
2. Turn water on and open valve. Open trigger gun for flow of
water through nozzles. Nozzles must have flowing spray. If
not, remove tips and clean; reassemble, making sure that
groove of nozzle is parallel to spray bar. Use pipe dope
when installing nozzles.
3. Start Pressure Washer. The Surface Cleaner is ready for operation.
4. Walk slowly behind the Surface Cleaner, cleaning as you go.
If striping occurs, slow down your pace.
5. Check “weep holes” on top of swivel periodically. Water will
seep slowly; if water shoots out, stop and replace seals.
Swivel assembly can be rebuilt with WW311, Quick Change Re-
placement Cartridge.
6. For maximum effectiveness keep spray tips clean.
If the machine vibrates, stop and clean spray tips.
CAUTION: Striking any raised obstacle during operation will damage
machine. If contact does occur and results in vibration when operating
machine, STOP and replace spray bar. Continued operation could
result in serious injury or damage to machine.
DO NOT LET MACHINE REMAIN STATIONARY ON SOFT
SURFACES, SUCH AS WOOD.
Hot or Cold Water – Max Temp 212 degrees F
2,000 to 4,000 PSI
5-12 GPM
2500 Max RPM
Operating Weight 20 lbs
Quick Connection
Trigger Gun Controlled
Flip–N–Fold Powder Coated Handle
24” Aluminum Powder Coated Cover
Heavy Duty Nylon Brush
Balanced & Machined Spray Bar
Heavy Duty Nylon Brush
Hot or Cold Water Applications
1-Year manufacturer defect warranty.
Whisper Wash Offers a 1-Year Limited Warranty.
This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from the date of purchase.
In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse, or misuse.
If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to the manufacturer prepaid only.
A dated sales receipt with the serial number is required for all warranty claims.
