The Li’l Big Guy is the smaller version of the Big Guy. With a 24″ diameter powder-coated aircraft grade aluminum cover and handle, The Li’l Big Guy is built tough for the tough job. The Li’l Big Guy has a pivoting 4” castor in the front and 2 fixed No-Flat 8” wheels on a steel axis assembly in the back to provide easy navigation. A heavy-duty nylon brush ensures that spray is confined to the surface area and not the operator or surrounding area. The fixed handle makes it easy to operate with one hand.
The signature Whisper Wash machined and balanced spray bar rotates underneath, providing the pressure cleaning force your operation requires. The Signature Whisper Wash Swivel with two self-lubricating twin thrust bearings provide the power to utilize either a two or four tip spray bar & eliminates zebra striping.
When you have a tough job to do, the Li’l Big Guy can get it done for you. The 24” wide surface coverage area provides a comfortable and highly efficient flat surface cleaner.
WARNING: Read Before Operating Machine!
ALWAYS WEAR PROTECTIVE EYE WEAR
KEEP CLEAR OF ROTATING NOZZLES
NEVER LOCK TRIGGER GUN OPEN WITH ANY DEVICE
DRAIN WATER IN COLD WEATHER TO AVOID FREEZING
Tampering with any part of this machine will void all warranties
Instructions for Operation
1. Connect to Pressure Washer.
2. Turn water on and open valve. Open trigger gun for flow of
water through nozzles. Nozzles must have flowing spray. If
not, remove tips and clean; reassemble, making sure that
groove of nozzle is parallel to spray bar. Use pipe dope
when installing nozzles.
3. Start Pressure Washer. The Surface Cleaner is ready for operation.
4. Walk slowly behind the Surface Cleaner, cleaning as you go.
If striping occurs, slow down your pace.
5. Check “weep holes” on top of swivel periodically. Water will
seep slowly; if water shoots out, stop and replace seals.
Swivel assembly can be rebuilt with WW311, Quick Change Re-
placement Cartridge.
6. For maximum effectiveness keep spray tips clean.
If the machine vibrates, stop and clean spray tips.
CAUTION: Striking any raised obstacle during operation will damage
machine. If contact does occur and results in vibration when operating
machine, STOP and replace spray bar. Continued operation could
result in serious injury or damage to machine.
DO NOT LET MACHINE REMAIN STATIONARY ON SOFT
SURFACES, SUCH AS WOOD.
Hot or Cold Water – Max Temp 212 degrees F
2,000 to 4,000 PSI
5-12 GPM
2500 Max RPM
Operating Weight 33 lbs
Quick Connection
Trigger Gun Controlled
Fixed Aluminum Powder Coated handle – to operate one handed
4” castor in front and 2 fixed No-Flat 8” wheels on a steel axis assembly in the back
24” Aluminum Powder Coated Cover
Heavy Duty Nylon Brush
Balanced & Machined Spray Bar
Heavy Duty Nylon Brush
Hot or Cold Water Applications
The Lil Big Guy Handle Construction
The molded trigger gun control of The Lil Big Guy provides easy gripping to ensure constant control over the running machine. The quick disconnect lever is conveniently located so that the operator may disengage the hose to spray out corners and curbs. Go ahead and put your hands on a Whisper Wash Professional Rotary Spray System today!
The Lil Big Guy – Check Out The Tires
The Lil Big Guy is designed with two rear never flat tires. Firm, yet receiving to the surface, these tires provide solid traction for maneuvering over large flat surface areas. The quick pivoting front caster provides swift movement around corners and within enclaves.
The Lil Big Guy Flip Up The Cover
When you flip up the cover on The Lil Big Guy you realize the expansive 24″ surface area covered by the rotating tips. This added surface coverage provides increased productivity when completing jobs that cover large, open areas. Surface cleaning is made easy with the balanced spray bar rotation and expansive coverage area provided by The Lil Big Guy!
1-Year manufacturer defect warranty.
Whisper Wash Offers a 1-Year Limited Warranty.
This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from the date of purchase.
In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse, or misuse.
If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to the manufacturer prepaid only.
A dated sales receipt with the serial number is required for all warranty claims.
