The Whisper Wash Maxima’s is a 36″ diameter powder-coated aircraft grade aluminum cover to provide maximum surface coverage. The four 3” pivoting casters allow the operator to easily guide the cleaner while the heavy-duty nylon brush ensures that the high pressure spray is confined to the surface cleaning area and not the operator. The ergonomically designed handle eliminates operator fatigue and increases safety while covering the maximum surface area possible.
The signature Whisper Wash machined and balanced spray bar rotates underneath, providing the pressure cleaning force your operation requires. The Signature Whisper Wash Swivel with two self-lubricating twin thrust bearings provide the power to utilize either a two or four tip spray bar & eliminates zebra striping.
The Whisper Wash Maxima 36” is easy to use and provides powerful industrial flat surface cleaning results. Save time and money by putting the Maxima 36 to work for you. When your work is done, simply collapse the handle at the mid-section for easy transport & storage.
WARNING: Read Before Operating Machine!
ALWAYS WEAR PROTECTIVE EYE WEAR
KEEP CLEAR OF ROTATING NOZZLES
NEVER LOCK TRIGGER GUN OPEN WITH ANY DEVICE
DRAIN WATER IN COLD WEATHER TO AVOID FREEZING
Tampering with any part of this machine will void all warranties
Instructions for Operation
1. Connect to Pressure Washer.
2. Turn water on and open valve. Open trigger gun for flow of
water through nozzles. Nozzles must have flowing spray. If
not, remove tips and clean; reassemble, making sure that
groove of nozzle is parallel to spray bar. Use pipe dope
when installing nozzles.
3. Start Pressure Washer. The Surface Cleaner is ready for operation.
4. Walk slowly behind the Surface Cleaner, cleaning as you go.
If striping occurs, slow down your pace.
5. Check “weep holes” on top of swivel periodically. Water will
seep slowly; if water shoots out, stop and replace seals.
Swivel assembly can be rebuilt with WW311, Quick Change Re-
placement Cartridge.
6. For maximum effectiveness keep spray tips clean.
If the machine vibrates, stop and clean spray tips.
CAUTION: Striking any raised obstacle during operation will damage
machine. If contact does occur and results in vibration when operating
machine, STOP and replace spray bar. Continued operation could
result in serious injury or damage to machine.
DO NOT LET MACHINE REMAIN STATIONARY ON SOFT
SURFACES, SUCH AS WOOD.
Hot or Cold Water – Max Temp 212 degrees F
2,000 to 4,000 PSI
6-12 GPM
2500 Max RPM
Operating Weight 37 lbs
Quick Connection
Trigger Gun Controlled
Aluminum Break-a-part Handle for storage
36” Aluminum Powder Coated Cover
Heavy Duty Nylon Brush
Balanced & Machined Spray Bar
4 3” pivoting casters
Hot or Cold Water Applications
Whisper Wash Maxima 36 Handle Construction
Just a quick connection away from your pressure washer, the Whisper Wash Maxima handle is designed for comfort and convenience. The trigger gun, equipped with a safety lever, is securely fitted into the holder. Additionally, the quick disconnect mid-section easily comes apart so that you may conveniently transport and store the machine.
Whisper Wash Maxima View Up Close
When you look closely at the Whisper Whisper Wash Maxima you see the dedication to quality that adds to the success of your operation’s flat surface cleaning operation. Additionally, we use stainless steel plates and a signature designed pivoting bracket to connect to an industrial tough, aircraft grade, aluminum handle.
1-Year manufacturer defect warranty.
Whisper Wash Offers a 1-Year Limited Warranty.
This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from the date of purchase.
In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse, or misuse.
If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to the manufacturer prepaid only.
A dated sales receipt with the serial number is required for all warranty claims.
