The Whisper Wash Classic Extreme Duty Surface Cleaner is constructed with an aluminum spun and powder-coated cover. The spun cover increases the tensile/yield strength and hardness with symmetry around a centerline. The accuracy and precision of the assembly allows us to push the spray bar even closer to the edge of the cover. This design allows the spray pattern to reach and clean the entire width of the cover.
Stainless steel sleeves are installed on each end of the machined and balanced spray bar. The stainless steel sleeve dramatically prolongs the life of the spray bar by protecting the ends from the abrasiveness of dirt, sand and water.
The signature Whisper Wash machined and balanced spray bar rotates underneath, providing the pressure cleaning force your operation requires. The Signature Whisper Wash Swivel with two self-lubricating twin thrust bearings provide the power to allow the Classic Extreme to work with either a 2-tip or 4-tip spray bar. The ergonomically designed handle eliminates operator fatigue and increases safety while covering the maximum surface area possible.
Hot or Cold Water – Max Temp 212 degrees F
2,000 to 4,000 PSI
4-12 GPM
2500 Max RPM
Operating Weight 19 lbs
Quick Connection
Aluminum Break-a-part Handle for storage
Aluminum spun and powder-coated cover
Heavy Duty Nylon Brush
Balanced & Machined Spray Bar with Stainless Steel Sleeves.
Trigger Gun Controlled
Hot or Cold Water Applications
1-Year manufacturer defect warranty.
Whisper Wash Offers a 1-Year Limited Warranty.
This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from the date of purchase.
In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse, or misuse.
If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to the manufacturer prepaid only.
A dated sales receipt with the serial number is required for all warranty claims.
