The Whisper Wash Classic was our first hovering flat surface cleaner and is still our most popular. The 19” Xenoy cover is surrounded by a heavy duty nylon brush that helps provide the smooth floating action and helps eliminate overspray. The signature Whisper Wash machined and balanced spray bar rotates underneath, providing the pressure cleaning force your operation requires. The Signature Whisper Wash Swivel with two self-lubricating twin thrust bearings provide the power to allow the Classic to work with either a 2-tip or 4-tip spray bar. The ergonomically designed handle eliminates operator fatigue and increases safety while covering the maximum surface area possible.
The WW Classic 19-inch Whisper Wash Surface Cleaner is the perfect accessory to your pressure cleaner if your regular cleaning jobs include: patios, pool decks, driveways, sidewalks, and other large flat surfaces.
WARNING: Read Before Operating Machine!
ALWAYS WEAR PROTECTIVE EYE WEAR
KEEP CLEAR OF ROTATING NOZZLES
NEVER LOCK TRIGGER GUN OPEN WITH ANY DEVICE
DRAIN WATER IN COLD WEATHER TO AVOID FREEZING
Tampering with any part of this machine will void all warranties
Instructions for Operation
1. Connect to Pressure Washer.
2. Turn water on and open valve. Open trigger gun for flow of
water through nozzles. Nozzles must have flowing spray. If
not, remove tips and clean; reassemble, making sure that
groove of nozzle is parallel to spray bar. Use pipe dope
when installing nozzles.
3. Start Pressure Washer. The Surface Cleaner is ready for operation.
4. Walk slowly behind the Surface Cleaner, cleaning as you go.
If striping occurs, slow down your pace.
5. Check “weep holes” on top of swivel periodically. Water will
seep slowly; if water shoots out, stop and replace seals.
Swivel assembly can be rebuilt with WW311, Quick Change Re-
placement Cartridge.
6. For maximum effectiveness keep spray tips clean.
If the machine vibrates, stop and clean spray tips.
CAUTION: Striking any raised obstacle during operation will damage
machine. If contact does occur and results in vibration when operating
machine, STOP and replace spray bar. Continued operation could
result in serious injury or damage to machine.
DO NOT LET MACHINE REMAIN STATIONARY ON SOFT
SURFACES, SUCH AS WOOD.
Hot or Cold Water – Max Temp 185 degrees F
2,000 to 4,000 PSI
4-10 GPM
2500 Max RPM
Operating Weight 17 lbs
Quick Connection
Aluminum Break-a-part Handle for storage
Xenoy Cover
Heavy Duty Nylon Brush
Balanced & Machined Spray Bar
Trigger Gun Controlled
Hot or Cold Water Applications
1-Year manufacturer defect warranty.
Whisper Wash Offers a 1-Year Limited Warranty.
This machine is warranted by the manufacturer to be free from defects in workmanship and materials under normal use. The manufacturer’s obligation under this warranty shall be limited to the repair or exchange of any part or parts that may prove defective in normal use within one year from the date of purchase.
In no event shall the manufacturer be liable for incidental nor consequential damages nor labor charges which shall result from any defect in the product or breach of this warranty. This warranty shall not apply to any part or parts which have been subject to accident, negligence, alteration, abuse, or misuse.
If any defect appears, immediately contact the dealer from which the unit was purchased. Returned units must be shipped to the manufacturer prepaid only.
A dated sales receipt with the serial number is required for all warranty claims.
